Product Features:
The use of imported module dedicated interface converter chip CP2102, is a very stable and mature USB to TTL program.
This module can take power from the USB, leads to the interface include 3.3V (100mA), 5V, GND, TX, RX, RTS, CTS, signal foot level is 3.3V USB supply-side with self-recoveryovercurrent protection , can effectively prevent the USB interface of the PC is damaged due to an overcurrent.
The module supports baud rate from 300bps ~ 1Mbps.
This module communication format support: 1) 5, 6, 7, 8 data bits; 2) support 1, 1.5, 2 stop bits; 3) odd, even, mark, space, none parity
This module uses machine SMD, reflow soldering, each module before shipment to go through testing to ensure high reliability.
The use of imported module dedicated interface converter chip CP2102, is a very stable and mature USB to TTL program.
This module can take power from the USB, leads to the interface include 3.3V (100mA), 5V, GND, TX, RX, RTS, CTS, signal foot level is 3.3V USB supply-side with self-recoveryovercurrent protection , can effectively prevent the USB interface of the PC is damaged due to an overcurrent.
The module supports baud rate from 300bps ~ 1Mbps.
This module communication format support: 1) 5, 6, 7, 8 data bits; 2) support 1, 1.5, 2 stop bits; 3) odd, even, mark, space, none parity
This module uses machine SMD, reflow soldering, each module before shipment to go through testing to ensure high reliability.
USB converter small board test
1, first download and install the driver, restart the computer (board connected to the computer), USB virtual port (see below) can be found in the properties -> hardware that, at this time, said the driver has been installed!
1, first download and install the driver, restart the computer (board connected to the computer), USB virtual port (see below) can be found in the properties -> hardware that, at this time, said the driver has been installed!
2, with a DuPont line shorted TXD and RXD port.
3, open the USB board test software, choose a good port, and click Start.
4 green OK means that the small plates and driver, red NO small plate or driver not.
3, open the USB board test software, choose a good port, and click Start.
4 green OK means that the small plates and driver, red NO small plate or driver not.
Driver download
Q & A
Q: Why is unlike the PC, USB to serial port as the use of transposon DB9?
A: PC machine serial DB9 head the level ± 12V, and negative logic, if you want to received the serial port of the microcontroller and other MCU need plus MAX232 like serial conversion circuit-level signals compatible with the MCU. USB to serial output 3.3V level signal can be directly connected to a 5V or 3.3V microcontroller. General communication need only TXD, RXD, GND can. Therefore, USB to serial port can be directly connected to the serial port on the MCU without the need to use the MAX232 such conversion circuit, more convenient touse.
Q: whether the product will need to install the driver?
A: need to drive, the description has been provided on the system drive, download
Q: Does the schematic or PCB diagram?
A: Sorry, no schematic and PCB diagram.
Q: Can you brush hard / satellite receiver?
A: The product is to make your computer more than a serial port, and TTL level serial port must be used, as you use the serial port to do the uses of many serial devices, the restaurantcan not provide the corresponding service, nor guarantee for that purpose. Receive the baby first thing to test the self-closing spontaneous, self-closing spontaneously through thereceiving of the baby, sending normal.
Q: Why is unlike the PC, USB to serial port as the use of transposon DB9?
A: PC machine serial DB9 head the level ± 12V, and negative logic, if you want to received the serial port of the microcontroller and other MCU need plus MAX232 like serial conversion circuit-level signals compatible with the MCU. USB to serial output 3.3V level signal can be directly connected to a 5V or 3.3V microcontroller. General communication need only TXD, RXD, GND can. Therefore, USB to serial port can be directly connected to the serial port on the MCU without the need to use the MAX232 such conversion circuit, more convenient touse.
Q: whether the product will need to install the driver?
A: need to drive, the description has been provided on the system drive, download
Q: Does the schematic or PCB diagram?
A: Sorry, no schematic and PCB diagram.
Q: Can you brush hard / satellite receiver?
A: The product is to make your computer more than a serial port, and TTL level serial port must be used, as you use the serial port to do the uses of many serial devices, the restaurantcan not provide the corresponding service, nor guarantee for that purpose. Receive the baby first thing to test the self-closing spontaneous, self-closing spontaneously through thereceiving of the baby, sending normal.
